. OPERATION OPERATION CHECK CENTRAL WARNING LAMP, ALARM BUZZER, MONITOR LAMPS AND METERS Before starting the engine, turn the starting switch to the ON position, press machine monitor check switch (1), and check that there is no failure in any monitor lamp. If any instrument does not work, there is probably a failure, so please contact your Komatsu distributor for inspection. Check if the braking capacity of the parking brake, foot brake, and retarder brake.
CHECK BRAKING CAPACITY OF SECONDARY BRAKE WARNING flat ground, raise the oil pressure to the parking brake to TRAVEL, then depress (2) to the D position, gradually raise the check that the machine does not move 3 - 78 CHECK BRAKING EFFE Check if the braking ca If any abnormality is fo If the machine moves, i t will lead to serious injury. If machine begins to move during the ins pection of braking capacity, lower the engine speed imme diately, set shift lever at N position, and then set parking brake swit ch at PARKING position.
If inspection is carried out when the body pilot lamp is lighted up and the shift indicator sh ows "F1", there is danger that the internal parts of the tra nsmission may be damaged. Before carrying out ins pection, lower the dump body securely and check that the body pilot lamp has gone out, then place the gear shift lever at the " D" position and check that the shift indicator shows "F2". Check the braking capa 1. 2. 3. Stop the machine o maximum, set the secondary brake pe Set gear shift lever engine speed, and even when the engi not move, it is norm 3. Lower the engine s and set the parking