Komatsu — OPERATIONS, CHECKS AFTER STARTING ENGINE

. OPERATION OPERATION OPERATIONS, CHECKS AFTER STARTING ENGINE BREAKING-IN THE MACHINE CAUTION WARMING-UP OPERATION 3 - 91 Your Komatsu machine has b een thoroughly adjusted and tested bef ore shipment. H owever, operating the machine under severe conditions at the beginning c an adversely affect the performance a nd shorten the machine life. Be sure to break-in the mach ine for the initial 100 hours (as indicate d by the servic e meter) During break-in operations, f ollow the precautions described in this Idle the engine for 5 mi nutes after starting it up. avy loads or at high speeds.

Avoid operation with he Immediately after starti ng the engine, avoid sudden starts, sudden acceleration, unnecessary sudde n stops, and sudden changes in dire ction. NOTICE gine suddenly before the warming-up operation is completed. more than 20 minutes at low idling or high idling. e engine, apply a load from time to time or run at a mid-range speed. Avoid accelerating the en gine suddenly before the warming-up o Do not run the engine for more than 20 minutes at low idling or h If it is necessary to idle th e engine, apply a load from time to tim e or run at a mid-range speed.

On machines equipped wi th auto emergency steering, if the mac hine is not fully warmed up, the emergency steering ma y be actuated momentarily whe n the parking brake switch is set to TR AVEL or the dump control l ever is operated . After the engine starts, do not start operating the machine im mediately. First, carry out the following operations and checks. 1. After starting the engi ne, run the engine at idle for 5 min utes for warming up o peration. 2. After the warming-up operation, check that the machine monitor is normal. If there is any problem When the AISS LOW revolution is automati , carry out maintenance or repair. 3.

Check if there is no pr oblem in the steering operation, flas hing of lights, sound of horn, exhaust gas c olor, noise, or vibration. If any pro When the steering oil steering when travelin blem is found, repair it. temperature is low, the steering will become slightly heavier, so avoid operating the g at high speed. emperature is high idle so avoid