. OPERATION OPERATION MOVING MACHINE OFF (FORWARD, REVERSE), STOPPING MOVING MACHINE FORWARD WARNING When moving the machine off, check that the area around the machine lever is at the FLOAT 3 - 93 is safe, then so Do not allow pe Clear the mach und the horn before start ople to get near the mac ine's travel path of any o Pay a particula r attention to the blind s pot at the rear of th e machine, when traveling 1. Check that t here is no warning disp lay on the machin e monitor. 2. Fasten the s eat belt. 3. Check that d ump lever (1) is at the FLOAT position a nd tha t the dump body If the dump lever to the position to c pilot lamp is out.
body pilot lamp is lig hted up, operate the dump HOLD position, then operate it to th e FLOAT ancel the dump body HOLD condition. REMARK When the engi ne is started, the du position, but the dump body is at HOL 4. Depressed t he brake pedal fully. Th en set parking br ake switch AVEL position to rele ase the parking b REMARK If the engine is s topped with the parkin g brake switch at TRAVEL, the parking brak e will be applied aut omatically even t When starting t hough the parking brake s witch is at TRAVEL. he parking brake swit he engine again, operate t ch to PARKING, and then then move it back to TRAVEL to cancel the parking brake.