Komatsu — HANDLING TIRES

. OPERATION OPERATION METHOD OF CALCULATING WORK T.Km.P.H. HD405 NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 to +0.03 MPa {0.3 kg/cm 2 , 4.3 PSI} of the value in the table above. The maximum travel speed must be kept to less than 40 km/h (24.9 MPH). Stop for at least one hour for every one hour of travel to allow the tires and other components to cool down. Never travel with water or dry ballast in the tires. 3 - 116 Work T.Km.P.H .

= av erage l oad per t ire x average trave l speed for Average t ravel speed = roun d trip dis tance x n umber of round trips per day/total operating hours per day Average l oad = (load when e mpty + l oad when loaded) / The total operating ho urs pe r day inc ludes the stopping time and re st periods * The T.Km.P.H .

in the table may diff er slightly according to the tire maker, so concerning o perations which require travel near th e trave l speed given in the table , consult your Komat su distributo PRECAUTIONS FOR LONG DISTANCE TRAVEL If the machine travels continuously at high speed for a long distance, there will be a marked increase in the If the machine travel s continuously at high s pee wil marked the generatio n of h eat in t he tire. This ma y cause premature damage to the tire, so be careful of the f ollowing points. Travel only w hen e mpty. Check the tir e infla inflatio n pressure.

Do not reduc e the t ire inflation pre ssure wh en travelin the following HD325 Tire size Inflation pressure 18.00-33-32PR (standard) 0.56MPa {5.75kg/cm2, 81.7 P 18.00R33aa (if equipped) 0.69MPa {7.00kg/cm2, 99.4 P Tire size Inflation pressure 18.00R33aa 0.69MPa {7.00kg/cm2, 99.4 P