. MAINTENANCE GUIDES TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance to be performed. KOMATSU GENUINE OILS: For lubrication of the machine, use the Komatsu genuine lubricants. Moreover use oil of the specified viscosity according to the ambient temperature. 4 - 2 GUIDES TO MAINTENANCE Do not perform any i nspection and maintenance ope ration that is not f ound in this KOMATSU GENUINE R EPLACEMENT PARTS: Use Komatsu genuin e parts specified in the Parts Bo ok as replacemen ALWAYS USE CLEAN WASHER FLUID:
Use automobile wind ow washer fluid, and be careful not to let any dirt ALWAYS USE CLEAN O IL AND GREASE: Use clean oil and gre ase. Also, keep the containers o f the oil and greas e clean. Keep foreign materials a way from oil and grease. CHECKING FOREIGN MATERIALS IN DRAINED OIL AND ON FILTERS: After oil is changed o r filters are replaced, check the ol d oil and filters for metal particles and for eign material s. If l arge quantity of metal pa suitable action. rticles or foreign materials are found, always report to the person in charge, and carry out harge, carry OIL CHANGE: If your machine is eq uipped with a fuel strainer, do n ot remove it while WELDING INSTRUCTIO NS:
e starting switch. than 200 V continuously. g cable within 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near ectors, etc., the instruments may malfunction. Turn off the engin Do not apply more Connect groundin g cable within 1 m (3.3 instruments, conn ectors, etc., the instruments may malfunction. If a seal or bearing happens to come between the p art being welded and grounding point, change the g rounding point to avoid suc h parts. a around the pins or the hydraulic cylinders as the grounding point. damage to the plated portion. Do not use the are a around the pins or the hydrau lic cylinders as the grounding Sparks will cause damage to the plated portion.
DO NOT DROP THINGS INSIDE MACHINE: When opening ins pection windows or the oil filler p ort of the tank to carry out inspection, be careful no t to drop nuts, bolts, or tool If such things are lead to failure. If y s inside the machine. dropped inside the machine, it m ay cause damage and/or malfunction of the machine , an d will ou drop anything inside the mac hine, always rem ove it immediately. r inspection. Do not put unnece ssary things in your pockets. C arry only things w hich are necessary fo r inspection.