. MAINTENANCE GUIDES TO MAINTENANCE DUSTY WORKSITES: into the oil. etc. have been 4 - 3 Wh en working at dusty worksites, I nspect the dust indicator freque ntly to see if the air cleaner is clog lean the air cleaner element a C lean the radiator core frequent C lean and replace the fuel filter C lean electrical components, es pecially the starting motor and alt ernator, to avoi d accumulatio n of When inspecting or changing th e oil, move the machine to a place that is free of d ust to preven t dirt from g etting AVOID MIXING OILS: If a different brand or grade of oil ha s to be added, drain the old oil and replace all the oil with the ne w brand or grade of o il.
Never mix different brand or grade of oil. LOCKING INSPECTION COVERS: Lock inspection cover securely in to position with the lock bar. If inspection or maintenance is performed with Loc inspection cover not locked in posi tion, there is a danger that it may b e suddenly bl ow shut by the win d and c ause inju ry to the worker. PRECAUTION WHEN REMOVING HYD RAULIC HOSE: The hydraulic system is always un der the internal pressure. When in specting or rep lacing piping or hoses, a lways che ck that the pressure in the hydr aulic circuit has been released. If i nspection or m aintenance is carried out while the circuit is still under pressure, it will lead to serious injury.
For detail s of the metho d of releasing t he pressur e, see eac h inspection and maintenance item. In p articular, with the brake circuit, depress the brake pedal at least 20 times to red uce the accumulator pressure to 0 before the operation. BLEEDING AIR FROM HYDRAULIC CIR CUIT: been repaired or replaced and if the hydraulic hoses, pipes If th e hydraulic components have disconnected, it is necessary to bl eed air in the circuit. See "WHEN REQUIRED (P AGE 4-22)". PRECAUTIONS WHEN INSTALLING HY DRAULIC HOSES: ns where there are O-rings or gasket seals, clean the mounting surface, and to forget to assemble the O-rings and gaskets. When removing parts at locatio eplace with new parts.
r When doing this, be careful not to forget to assemble the O-rings When installing the hoses, do n ot twist them or bend them sharply . If they are in stalled so, the ir service li fe will b e shortened extremely and the y may be damaged.