Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE BLEED AIR FROM REAR BRAKE WARNING and check if the brake oil TRANSMISSION CASE, ADD OIL (PAGE 3-74)". 4 - 34 Stop the machine on level ground and put blocks under the wheels before To make it easier to bleed the air, warm the oil up to a temperature of at least 40°C (104°F ) before bleeding the air. Bleed the air from the rear bra kes in the same way on both t he left and 1. Start the engine, check th pressure caution lamp is o 2. Remove the cap installed then insert a vinyl hose. Prepare a container with o hose approx. 50 mm (2.0 i (Use a commercially avail 3. Depress the brake pedal a 3/4 turns. Keep the peda come out from the vinyl ho 4.

Pull the retarder control l approx. 3/4 turns. Keep t until no more bubbles com 5. After bleeding the air, tight en bleeder screw (1) securely and fi t the 6. Repeat the above procedu re in Step 4 to bleed the air fr om bleeder screw (2) of the 7. Repeat the above proced bleeder screw (3) of the re 8. Add oil. For details,