Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE BLEED AIR FROM FRONT BRAKE WARNING 4 - 35 Stop the m achine on level groun d and put blocks under t he wheels bef To make i t easier to bleed the air, warm the oil up t o a temperat ure of at least 40°C (104°F) b efore bleeding the air. Repeat th e same procedure on the left and right si When ble eding the air from th e front brakes and rea r brakes at th e same time, bleed the air fro m the rear brakes first. 1. Start t he engine, check th at the oil in the transmission case is at the specified level, that the brake oil pressure cautio n lamp is out, and t hat the front brake cu t-off switch i s at the 2.

Remo ve the cap of bleed er screw (1), then ins ert a vinyl ho (inside diameter: 8 mm (0 .315 in)). Prepare a c ontainer with in it an d insert the other e nd of the hose approx. 50 mm (2.0 into th e oil. (Use any co mmercially available v inyl hose.) 3. Depre ss the brake pedal and loosen bleeder sc rew (1) appr 3/4 tu rns. Keep the ped al depressed until no more bubbl ose. come out from the vinyl h 4. After b leeding the air, tigh ten bleeder screw (1) securely and the ca 5. Add o il. For details, see "CHECK OIL LEVEL IN TRANSMISSION CASE, ADD OIL (P