. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING any problem is found, ask your Komatsu distributor for repair. CHECK BRAKING CAPACITY OF PARKING BRAKE WARNING any problem is found, ask your Komatsu distributor for repair. 4 - 52 If the machine move s, it will lead to seriou s injury or death. If machine begins to move du ring the inspection of braking capacity, lower the en gine speed immediatel y, set ge ar shift le ver at N position, and then dep ress the foot brake. If inspection is carrie d out when the body pil ot lamp i s lighted up and the shift indicator show s "F1", there is dan ger that the internal parts of the tr ansmission may be da maged.
Before carrying out in spection, lower the du mp body securely and check th at the body pilot la mp has gone out, the n place the gear shift lever at the "D" position and chec k that the shift ind icator s how s "F2". Check the braking ca pacity of the retarder brake a s follow s. 1. 2. 3. Stop the machine (1) fully. Set shift lever (2) on flat ground and pull retarder control leve to the D position, gradually raise the engin speed. If the mac speed reaches 12 Lower the engine hine does not move 00 rpm, it is normal. speed, set gear shi even when the engin ft lever at N position.
I NOTICE If t he dump body is not s eated and the parking brake is a t "TRAVE L", the spee d range is set to F1 , even when the gea r shift lever is at the "D" position. If the machine move s, it will lead to seriou s injury or death. If machine begins to move du ring the inspection of braking capacity, lower the en gine speed immediatel y, set ge ar shift le ver at N position, and then dep ress the foot brake. If inspection is carrie d out when the body pil ot lamp i s lighted up and the shift indicator show s "F1", there is dan ger that the internal parts of the tr ansmission may be da maged.
Before carrying out in spection, lower the du mp body securely and check th at the body pilot la mp has gone out, the n place the gear shift lever at the "D" position and chec k that the shift ind icator s how s "F2". Check the braking ca pacity of the parking brake a s follow s. 1. 2. 3. Stop the machine (1) to PARKING. Set shift lever (2) on flat ground and set parking brake switc to the D position, gradually raise the engin speed. If the mac speed reaches 12 Lower the engine hine does not move 00 rpm, it is normal. speed, set gear shi even when the engin ft lever at N position. I