. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DIFFERENTIAL CASE WARNING CLEAN DIFFERENTIAL CASE BREATHER WARNING 4 - 76 The par ts and oi l are at high temperat ure after the engine is stopped, and may cause serious burns. Wait for the temperature to go do wn befo re starting the opera If there i s still pr essure remaining insi de the case, the oil or plug may fl y out. Turn the plug slowly to r elease the pressure , then remove it carefu Refill c apacity : 45 liters (11.88 U 1. Remove drain plug (P), drain the oil, then tighten the plu again. Add oil through the hole for plug (G) to the specified level. plu again 2. Add o il throu gh the hole for plug (G) to the specifie d level 3.
After adding oil, check that the o il is at the specified level. Se "CHECK OIL LEVEL IN DIFFERENTIAL CASE, ADD OI ". (PAG E 4-43) The par ts and oi l are at high temperat ure after the engine is stopped, and may cause serious burns. Wait for the temperature to go do wn befo re cleaning the engin e breather. a hazard that dirt may be blown up and cause serious injury. k, or other protective equipment. When u sing com pressed air, there is a hazard that dirt may be blown up Always use safe ty glasses, dust mas k, or other protective equipment. 1. Remove all mud and dirt from around the breather befor removing the breather.
Use cle an diesel fuel or flushing oil t rinse the dirt out from the inside . er. 2. After flushing , install the breath