. MAINTENANCE SERVICE PROCEDURE contact your Komatsu distributor for inspection or CHECK WATER PUMP Check around the water pump for water leakage. If any part is leaking, ask your Komatsu distributor for inspection/repair. CHECK ACCUMULATOR CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER 4 - 80 CHECK STARTING MOTO The repa If the engine is started freque ntly, carry out inspection every 100 CHECK FAN PULLEY AND Che ck for play of the pulley an d leakage of grease. If any problem is found, please contact y our Komatsu distributor. At 4 000 hours or 2 years, whic hever comes sooner, ask your Komatsu distributor to replace the accumulator parts.
Che ck clamps (1) to (18) for lo ose bolts and hardening of the rub ber parts. If there are any loose bolts or hardened rubb er, please contact your K omatsu distributor for replacement