. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) table. 6 - 22 *1: Between the start of the loading operation and the start of the dumpin g operation, alw ays keep the d ump l ever at the FLOAT position. If the du mp lever is operated to any position other than FL ecorded when dumping, or the ecorded accurately. With the display, [b-FL] may be d when dumping oading, the time display may be given instead of the distance display when starting t *2: When the load is less than 5% of *3: I f there is no new load within 5 m inutes from the time of the previous l Both the display panel and exter nal display lamps will change to the d isplay for "Whe n empty, Stopped" in the *4:
I f the machine is stopped again b efore traveling 160 m, both the display panel and external display lamps will oading, Stopped" in the table. ay panel and e xternal display lamps will r I eturn to the display for "During l f the load is dumped before trave ling 160 m, both the display panel an d external disp lay lamps will j ump to the display for "When dumping" in th e table. *5: I f loading is carried out again wh en this happens: I " mmediately after loading again, both the display panel and external d isplay lamps wi ll return to the displa y for During loading, Stopped" in the table. *6:
I f the load that is dumped is not more than 50% of the standard paylo ad, the machine will not recognize th at a l oad has been dumped. It will co nsider it only as a movement of the d ump lever. (Se e *1) *7: The display for the total payload is given in units of 100 t (rounded to t he nearest 100 ). For the method of clearing the to tal payload (resetting of the measurement to 0), see "FORCED DISPLAY OF TOTAL PAYLOAD AND OVERA LL NUMBER OF CYCLES (PAGE 6- 33)". When dumping, if the gearshift le ver is at any position other than N, [b -FL] flashes.
If the dump leve r is at any position other than FLOAT from t he beginning of the loading operation to the end of th e dumping operation , the data will not be recorded accurat ely. (See *1) The payload meter retains the existin g condition when it is empty, during l oading, and wh en it is loaded, even i f the power is turned OFF, so when the condition. operator starts operation again, the system starts from the existing machine