Komatsu — METHOD OF OPERATION

. ATTACHMENTS, OPTIONS ARSC (AUTOMATIC RETARDER SPEED CONTROL) METHOD OF OPERATION METHOD OF SPEED SETTING WARNING 6 - 70 ACTUATION OF ARSC SYSTEM (ARSC) switch is ON. lever is pressed, the travel speed at that point is set as the The ARSC system is actuated when the auto retarder Whe n the set switch of the auto retarder (ARSC) set he downhill travel speed. When traveling downhill, if the machine attempts to exceed the set travel speed, the retarder is a utomatically actuated. set speed indicator and is saved in memory. ARSC, the ARSC is canceled and the speed increases.

The set travel speed is displayed on the auto retarder If th e accelerator is depressed during operation of the ARSC, the ARSC is canceled and the speed increases. If th e brake pedal or retarder control lever are operate d while the ARSC is being operated, it is possible to reduce the speed or stop the machine in the same way as du ring normal operation of the brakes. If th e set travel speed is near the gear shifting point or there is a change in the grade of the slope, the transmission may shift (shift up or shift down) even when the ARS C is being operated. The time taken for the machine travel speed to match the set speed may differ according to the grade of the slope.

The re may also be a slight difference between the set travel speed and the speed displayed on the speedometer. If the speed is set to a speed that exceeds the maximum per missible speed obtained from the brake performance graph, ther e is dang er that there will be overheating and that the retarder bra ke may be damaged. Always set the speed so that it does not exceed the maximum permissible speed. If th e actual machine speed during the setting operatio n is less than 10 km/h (6.2 MPH), the speed is set to 10 km/h (6.2 MPH). If it is higher than 55 km/h (34.2 MPH), it is set to 55 km/h (34.2 MPH). In all other cases, it is set to t he actu al travel speed.

ction of the gearshift lever as follows. The travel speeds that can be set depend on the sele Whe n the gearshift lever is at the D, 6, 5, 4, 3, 2, or L positions, the range for the set speed is 10 to 55 km/h (6.2 to 34.2 MPH). ver is at the N or R positions. It is impossible to set the speed when the gearshift le METHOD OF CARRYING OUT FINE ADJUSTMENT OF SET TRAVEL SPEED Whe n it is desired to raise the set travel speed by 1 km /h (tap up), move the auto retarder (ARSC) set lever up once. Whe n it is desired to lower the set travel speed by 1 km /h (tap down), move the auto retarder (ARSC) set lever down onc e. REMARK ging the set travel speed. time, the cancel operation is given priority.

time, the tap up operation is given priority. me time, the tap down operation is given priority. ing fine adjustment of the set travel speed. Release the auto retarder (ARSC) set lever after chan If th e set switch and cancel are operated at the same If th e set switch and tap up are operated at the same If th e set switch and tap down are operated at the sa The tap up and tap down operations are used for mak It is possible to adjust the set travel speed up to ± 5 km /h (3.1 MPH) when traveling in ARSC (when the accelerator ped al is released). When the accelerator pedal is be ing depressed, the ARSC is canceled, so it is possible to to 34.2 MPH).

operate freely in a range from 10 to 55 km/h (from 6.2