Komatsu — METHOD OF OPERATION

. ATTACHMENTS, OPTIONS ARSC (AUTOMATIC RETARDER SPEED CONTROL) travel speed is reached, press the set switch on the auto retarder (ARSC) set lever. The set travel speed will be changed to the new speed. on the auto retarder set travel speed 6 - 71 METHOD OF INCREASING SET T If it is desired to increase the set s peed, depress the accelerator pedal to increase speed, and when the desired set METHOD OF DECREASING SET T RAVEL SPEED If it is desired to decrease the set speed, operate the retarder control lev er to reduce speed, a nd when the desired set travel speed is reached, press the set switch on the auto retarder (AR SC) set lever. The set travel speed will be changed to the new speed.

REMARK After using the retarder control le ver to reduce the speed, return it to its If the lever is operated suddenly, the brakes will be applied suddenly. SAVING SET TRAVEL SPEED If the machine starting switch is tu rned OFF or the auto retarder (ARSC) switch is turned OFF, the set travel speed remains in the memory. When th e starting switch is turned ON or the aut o retarder (ARSC) swit ch is turned ON, the previous set speed is displayed a gain on the auto retarder set speed ind icator. TRAVELING AGAIN AT SET TRAV EL SPEED If you travel repeatedly on the sa me slope, set the travel speed. It is the n possible to use that set travel speed by actuating the ARSC without havi ng to reset.

Before entering a downhill slope, i f the travel speed has been adjusted to a speed lower than the set speed displayed on the auto retarder set speed ind icator, the auto retarder READY pilot la mp lights and the ARS C is actuated when the accelerator pedal is released. REMARK When traveling at a speed greate r than the set speed displayed on the au to retarder set speed indicator, the ARSC is not actuated even when the ac celerator pedal is released. When this happens, the auto re tarder READY pilot lamp also does not light up.

Alw ays adjust the travel speed to a speed l ower than the set spe ed displayed on the auto retarder set speed indicator, and check that the auto retarder REA DY pilot lamp lights up . Before starting down the hill, che ck that a suitable set speed is displa indicator and that the auto retard er READY pilot lamp is lighted up. METHOD OF CANCELING SET TR AVEL SPEED Method 1: If the cancel operation is carried out for more than 1 second, th e control is stopped. When this happens, the auto retarder set s peed indicator shows 0. Method 2: If the auto retarder (AR SC) switch is turned OFF, the control i s canceled. When thi s happens, the auto retarder set speed indi cator goes out.

REMARK For Method 1, cancel operation m ust be continued for at least 1 second ( different from other sw itches) to cancel the control. This is to prevent any pro blem of the control being canceled if th e switch is touched b y mistake.