Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS When the wheel brake is applied, part (A) of the stop / tail lamp lights up. GEAR SHIFT LEVER can be selected with this lever (3) to match the 3 - 40 ACCELERATOR PEDAL djust the engine speed. This pedal (2) is used to a djust the e ngine s It ca n be oper ated freely b etween the engin e low idle p osition and the f ull throttle position. The gear ran trave l conditio D po sition: or normal travel. placed in this position, the transmission is shifted from 2nd torque converter drive to 7th speed to el speed of the machine. ody is raised, the shift lever is fixed at 1st. Always p body when traveling.

speed in this position is 70.0 km/h (43.5 MPH). This is used f or normal tr If th e lever is placed in t from 2nd t his position automatically orque matc h the trav el speed of the machin If th e dump b ody is raise d, the shift lowe r the dum p body whe n traveling. The maximum speed in th is position i s 70.0 km/h (43.5 REMARK To c omply wit h the EU saf ety standar ds (EN 474-6 5.1. 3), if the machine travels with the dum p body not completely lowered, the t ransmission is fixed in 1 st and the gear c annot be shifted. R po This is used w hen traveli ng in revers This position uses the tor que convert er driv e. The max imum travel speed in this position is 10.6 km/h (6.6 MPH).

It is impossibl e to travel i n reverse if the du mp body is raised. Lower "FLOAT" posi tion, then se t the gears hift lev er to the "R