Yamaha Exciter II-570 — Brake

___________ BR_~_EI~~41 4. Inspect: • Torsion spring CD Fatigue/Damage --+ Replace end cover unit. Inspection steps: • Check the fatigue of the torsion spring by the projection mark ® on the guide ® located between the base marks @ on the end cover @. If projection mark ® is not in the range between the base marks @ , replace the end cover unit. 5. Inspect: • Adjusting ratchet CD Cracks/Wear/Damage --+ Replace. • Spring (brake cable) ® Fatigue/Damage --+ Replace. • Brake pad@ thickness (See page 2-18) • Brake disk @ Bend/Cracks/Damage --+ Replace. ASSEMBLY AND INSTALLATION Reverse the "REMOVAL" and "DISASSEMBLY" procedures. Note the following points. 1. Assemble:

• Caliper body Assemblage steps: • Lubricate the spiral gears CD on the caliper body and lever with silicone grease . • Align the projection mark ® on the lever with the "IN" mark@onthecaliperbody,screwthe lever@counterclockwise to the caliper body. 4-26 http://ReadManuals.com