Yamaha Exciter II-570 — Disassembly

ENG 1 "-1 DISASSEMBLY . ..,. 2. Remove: Nut (magneto rotor) CD • Washer NOTE: ________________________ _ Use the Universal Rotor Holder (90890-01235, YU- 01235) ® to hold the magneto rotor@. • Magneto rotor CD NOTE: ______________________ ___ 3. Remove: • Remove the magneto rotor using the Rotor Puller (90890-01362, YU-33270) ® . • Fully tighten the tool holding bolts, but make sure the tool body is parallel with the magneto rotor. If necessary, one screw may be backed out slightly to level tool body. 4. Remove: • Stator assembly CD Woodruff key ® CYLINDER HEAD AND CYLINDER 1. Remove:

• Thermostatic valve cover CD • Thermostatic valve ® • D-ring @ AWARNING Handle the thermo-unit with special care. Never subject it to strong shock or allow it to be dropped. Should it be dropped, it must be replaced. 5·4 http://ReadManuals.com