Yamaha Exciter II-570 — Disassembly

___________________________ D_I_SA_S_S_E_M_B_~_IENGI~I 2. Remove: • Cylinder head CD NOTE: ______________________ _ • Before removing the cylinder head, loosen the spark plug ® . • The cylinder head holding nuts and bolts should be loosened 1/2 turn each time, and remove. 3. Remove: • Gaskets (cylinder head) CD • Cylinders ® • Gasket (cylinder) PISTON 1. Remove: • Piston pin clip CD • Piston pin ® • Piston ® • Small end bearing @ NOTE: ______________________ _ • Before removing the piston pin clip, cover the crankcase with a clean rag so you will not accidentally drop the clip into the crankcase. • Before removing the piston pin, deburrthe clip groove and pin hole area.

If the piston pin groove is deburred and the piston pin is still dif- ficult to remove, use Piston Pin Puller (90890- 01304, YU-01304). • Put identification marks on each piston head for reference during reinstallation. Do not use a hammer to drive the piston pin out. 5-5 http://ReadManuals.com