INSPECTION AND REPAIR 1 ENG 1"-1 CRANKCASE AND CRANKSHAFT 1. Remove: • Engine brackets CD • Crankcase (lower) NOTE: ______________________ __ • Remove the bolts starting with the highest numbered one. • Loosen each bolt 1/4 turn, and remove them after all bolts are loosened. Ifthe case halves are tightly stuck together, tap lightly on the tabs indicated on the crankcase with a soft-head hammer. • The slits shown in the crankcase can be used to remove it. Be sure not to give damages the mating surface. 2. Remove: • Dowel pins CD • Crankshaft ® INSPECTION AND REPAIR CYLINDER HEAD 1. Eliminate: • Carbon deposit (from combustion chamber) Use rounded scraper CD .
Do not use a sharp instrument and avoid damaging or scratching. 2. Inspect: • Cylinder head water jacket Crust of minerals/Rust 4 Remove. 5-6 http://ReadManuals.com