Yamaha Exciter II-570 — Recoil Starter

RECOIL STARTER I ENG 1 '-I 2. Pass the starter rope end into the sheave drum, and knotthe rope end. Then fit the knot into the cutout in the sheave drum. 3.Wind: • Starter rope (2 turns counterclockwise) (to sheave drum) 4. Install: • Sheave drum (into starter case) NOTE: ______________________ _ Be sure the inner hook on the starter spring hooks around the post on the sheave drum. 5. Apply: • Grease (lightly) (to pivot point ofthe drive pawl) I'§d Low-temperature grease • Drive pawl CD • Return spring ® NOTE: ___________ _ 6. Install: Hook the return spring end to the drive pawl CD. Then, hook other end of the return spring to the post @ on the sheave drum. 7. Install:

• Spring (drive plate) • Spring seat • Drive plate • Special washer • Washer • Spring washer Nut 5-26 http://ReadManuals.com