Yamaha Exciter II-570 — Recoil Starter

RECOIL STARTER ENG 1'-1 NOTE: ______________________ __ Be sure the cutout portion in the drive plate fits over the post on the drive pawl. Nut (drive plate): 10 Nm (1.0 m· kg, 7.2 ft· Ib) LOCTITE® 8. Pull about four inches of starter rope from out of the cutout portion in the sheave drum, and rotate the sheave drum five times counterclockwise to preload the starter spring. Then knot the rope end so that it will not be pulled into the recoil starter case. 9. Install: • Recoil starter • Starter handle Bolt (recoil starter): 10 Nm (1.0 m • kg, 7.2 ft· Ib) 10. Check the starter for smooth operation. If it does not operate smoothly, repair it. 5-27 http://ReadManuals.com