Yamaha Exciter II-570 — Fuel Pump

_______________ FU_E_L_P_U_M_P_I~R~.I Measurement and adjustment steps: • Place the machine on a level place. • Attach the Fuel Level Gauge (90890-01312, YM-01312-A) CD to the float chamber nozzle. NOTE: ___________ _ Use the adapter (outside diameter ў6 hose)® when attaching the Fuel Level Gauge. • Loosen the drain screw ® and start the engine. ~Ґ""'~~-~=::::T-'-------'~-_t_® Place the tube between the guide marks @on the carburetor body. • Measure the fuel level ® with gauge. If the fuel level is incorrect, adjust the fuel level. • Remove the carburetor. • Inspect the valve seat and needle valve. • If either is worn, replace them both.

• If both are fine, adjust the float height by bending the float tang @ on the float. • Recheck the fuel level. FUEL PUMP OPERATION CHECK 1. Remove: • Drive V-belt guard (See page 2-15) • Drive V-belt • Secondary sheave (See page 4-11) • Carburetors (See page 7-2) • Spark plug leads CD • Ignition coil leads ® 3. Remove: 2. Disconnect: • Intake silencer ® 7-7 http://ReadManuals.com