______________ F_U_E_L_P_U_M_pl~R~.1 4. Inspect: • Fuel hose CD • Fuel delivery hoses ® • Pulser hose ® Clog/Damage -)- Replace. 5. Check: • Fuel pump operation Checking steps: • Connect a hand-operated vacuum pump CD (Such as Mighty - Vac~) to the pulser hose ® . Place a receptacle ® under the fuel delivery hoses end @. • Opetate the hand-operated vacuum pump CD (Such as Mighty - Vac~), when checking the fuel flow from the fuel delivery hoses @ . If fuel does not flow out, check the fuel cock. If no defects are observed on the fuel cock, replace the fuel pump assembly. • To replace the fuel pump assembly, perform the following steps from 6 to 7. 6. Disconnect:
• Pulser hose CD (from the crankcase) • Fuel hose ® (from the fuel tank) • Fuel delivery hoses ® (to the carburetor) AWARNING Plug the fuel hose®so thatfuel does not run out of the fuel tank. Spilled fuel can be a fire hazard. 7. Replace: • Fuel pump assembly @ Nut (fuel pump assembly): 10 Nm (1.0 m 0 kg, 7.2 ft olb) 7-8 http://ReadManuals.com