ELECTRICAL STARTING SYSTEM I ElECI iii I Removal 1. Remove • Starter motor (See page 5-2) Disassembly 1. Remove: • Rear cover securing bolts CD • Rear cover ® • Brush holder assembly @ Yoke@ 2. Remove: • Pinion gear Removal steps: • Push in the pinion stopper CD . • Hold the clip ® with a locking pliers @ ,and open the clip ® , with a slotted head screw driver@ . NOTE: ____________________ __ Take care not to scratch the armature shaft ®. • Clip ® will come out when locking pliers @ is released. Support the pinion stopper CD so that the loosened pinion stopper CD and return spring ® will not fall out. • Remove the pinion gear. 3. Remove:
• Front cover CD (from armature ®) 8-10 http://ReadManuals.com