_________________ E_L_E_C_TR_ _CA_L __ sT_~_R_T_IN_G_S_V_S_T_E_M_IELEcl iii 1 Inspection 1. Inspect: • Bearings (front CD and rear ® ) Pitting/Damage --» Replace. 2. Inspect: • O-rings (front CD and rear ® ) Damage --» Replace. 2 3. Inspect: Commutator (outer surface) Dirty --» Clean it with #600 grit sandpaper CD. Hold the armature in a vise ® and copper or aluminium plate @ . NOTE: ________________________ _ Lightly grip the armature with a vise. 4. Measure: Commutator (diameter) Measure the diameter a of the commuta- tor at points where the brush comes in contact. Out of specification --» Replace. Commutator wear limit @ : 27 mm (1.06 in) 8-11 http://ReadManuals.com