BRAKE ADJUSTMENT/DRIVE CHAIN II~gr I ~ I Adjustment steps: • Loosen the locknut CD . • Turn the adjuster ® in or out until specified distance is obtained. Turning in Distance I'Ll' is increased. Turning out Distance I'Ll' is decreased. • Tighten the locknut CD. 2E171 DRIVE CHAIN Oil Level Inspection 1. Place the machine on a level surface. 2. Remove: Muffler 3. Place a rag under the checking hole CD (oil level). 4. Remove: • Checking bolt ® • Gasket (checking bolt) 5. Inspect: • Oil level (drive chain housing) Oil flows out ---t Oil level is correct. Oil does not flow out -> Oil level is low. Add oil until oil flows out. Recommended oil: Gear oil API GL-3 SAE #75 or #80 6. Inspect:
• Gasket (checking bolt) Damage -> Replace. 7. Tighten: Checking bolt: 10 Nm (1.0 m • kg, 7.2 ft· Ib) Oil Replacement Oil replacement step: Warm up the engine for several minutes. • Remove the Muffler. • Place some rags u nderthe chain housing and place a small gutter to channel the oil to the hole. • Remove the chain housing CD. • Drain the oil. 2-20 http://ReadManuals.com