_________________________ D_R_IV_E_C_HA_I_N P:g~I~1 Be sure to remove any oil from the heat protec- tor(§). Recommended oil: Gear oil API GL-3 SAE #75 or #80 Oil capacity: 250 cm 3 (8.8 Imp OZ, 8.5 US oz) Checking Chain Tension Proper chain tension can be checked by measur- ing the amount of free turning movement ("free play") in the secondary sheave. NOTE: Release parking brake. 1. Make a reference mark CD on the drive V-belt guard ® above the secondary sheave ®. Turn the secondary sheave counterclockwise @ by hand until it stops. Mark (§) the sheave next to the reference mark on the guard. 2. TUrri the secondary sheave clockwise ® by hand until it stops.
Mark (J) the sheave again next to the reference mark on the guard. 3. Measurethe distance@betweenthemarkson the sheave. @ Free turning movement distance. Maximum Free Turning: Movement: 9 mm (0.35 in) NOTE: _______________________ _ There will always be at least 4 mm (0.16 in) of movement due to drive line slack. 4. If free play is excessive, follow adjustment procedures. 2E182 Chain Slack Adjustment ,. Adjust: • Drive chain slack Adjustment steps: • Loosen the locknut CD and unthread sealing washer ® slightly. • Turn the adjuster ® in finger tight. Tighten the locknut. Recheck secondary sheave movement. Repeat adjustment steps 1 through 4 if necessary. 2-21 http://ReadManuals.com