Yamaha Exciter II-570 — Tuning

CARBURETOR TUNING II~g~ I ~ I Trouble Check point Remedy Adjustment Poor performance at Starter valve is left Fully close valve Return starter lever to its high speeds open home position. (Related trou bles) Clogged air vent Remove and clean • Power loss Clogged or loose main Clean and retighten • Poor acceleration Remove main jet and clean jet with compressed air, then install.

Clogged fuel pipe Clean or replace Dirty fuel tank Clean fuel tank Air leaking into fuel Check joint and re- line tighten Low fuel pump per- Repair pump or re- formance place Clogged fuel filter Replace Clogged intake Check for and removeice Abnormal combus- Lean mixture Clean carburetor tion and adjust (Mainly backfire) Dirty carburetor Clean carburetor Dirty or clogged fuel Clean or replace fuel pipe pipe Overflow Clogged air vent Clean (Related troubles) Clogged float valve Disassemble and Clean while taking care not to • Power idling clean scratch valve seat.

Poor performance at low, mid-range, Scratched or unevenly Clean or replace float Valve seat is press-fitted to • Excessive fuel con- valve seat The body must be replaced if and high speeds worn float valve or valve and valve seat body. sumption seat is damaged. • Hard starting Broken float Replace float • Power loss Incorrect float level If not within the • Poor acceleration specified range, check the following parts and replace any defective part. Worn float tang • Replace float Replace float assembly. Worn pin • Replace arm pin • Deformed float arm • Replace float 2-36 http://ReadManuals.com