________________________________ S_T_EE_R_I_N __ G ICHASI~ I 2. Inspect: • BearingsCD (steering column) Wear/Damage ~ Replace. • Steering column ® (bearing contact sur- faces) Scratches/Wear/Damage ~ Replace. ____ ~a!? __ t __ 3. Inspect: • Relay rod CD Tie-rod® Bending/Cracks/Damage ~ Replace. o ~ A WARNING Do not attempt to straighten a bent rod. This may dangerously weaken the rod. 4. Check: • Tie-rod end movement Tie-rod end free play exists ~ Replace. Tie-rod end turns roughly ~ Replace. INSTALLATION Reverse the "REMOVAL" procedure. Note the following points. 1. Install: • Tie-rodCD Relayrod® NOTE:
______________________ __ • Install the rod end @ with the left-hand thread onto the tie-rod on the right side. • The threads on both rod-ends must be the same length. Locknut (tie-rod end): 25 Nm (2.5 m • kg, 18 ft • Ib) LOCTITE@ Nut (suspension bracket-tie-rod): 25 Nm (2.5 m • kg, 18 ft Ib) 3-5 http://ReadManuals.com