I POTW R Rio '0\1 PRIMARY SHEAVE AND DRIVE V-BELT - ~ -------------------------------------------------------- • Spider CD NOTE: ______________________ __ 5. Remove: Special tools and LOCTITE® are necessary for assembling the spider and fixed sheave. If these are unavailable, avoid disassembling. Removal steps: • Immerse the primary sheave assembly in appoximately80' -100'C (176° - 212° F) water for several minutes. • Hold the lower piece of the Clutch Spider Separator (90890-01711, YS-28890-B) CD on a rigid table using a suitable mounting bolts. Then, install the Clutch Separator Adapter (90890-01740, YS-34480) ® onto the separa- tor.
• Fit the primary sheave assembly onto the adapter, and secure the supporting plates ®. NOTE: ____________________ __ Securely fit the projections of the adapter into the fixed sheave holes. • Set the bar wrench onto the spider and turn the special tool clockwise to loosen the spi- der. • Spider has a left-hand thread. • To loosen the spider, high torque is required so be sure that the spider, fixed sheave and special tool are placed securely. Loosen the spider carefully to prevent cracks and/o'r damage to the sheaves and spider. 805-025 • Remove the fixed sheave @, fixed sheave stopper ®, and sliding sheave ® from the spider (j). 4-3 http://ReadManuals.com