PRIMARY SHEAVE AND DRIVE V-BELT- ~ -------------------------------------------- I POTW R Rio ~I INSPECTION 1. Inspect: • Spider CD (tapered portion) • Sliding sheave ® • Fixed sheave @ • Primary sheave cap CD Cracks/Damage -> Replace. 2. Measure: • Bushing-to-sheave clearance Out of specification -> Replace bushing. Use a feeler gauge CD Bush clearance (primary sheave cap) [A] : I---~ 0.25 mm (0.01 in) Bush clearance (sliding sheave) lID : 0.25 mm (0.01 in) 3. Inspect: • Primary sheave spring CD Cracks/Damage -> Replace. 4. Measure: • Primary sheave spring free length @ Out of specification -> Replace. @ Primary sheave spring free length:
76.5 mm (3.01 in) For EX570(E) 85.4 mm (3.36 in) For EX570ST 78.7 mm (3.1 in) For EX570SX 4 5. Inspect: • Weight CD • Roller ® • Bushing G) • Slider G) • Rivet ® • Collar Wear/Scratches/Damage -> Replace. ~ Slider inside clearance@ +@l Min. 0.15 mm (0.0059 in) Max. 0.45 mm (0.0177 in) Rivet replacement steps: • Remove old rivet with the appropriate drill. • Insert the rivet CD from the ID mark ® side . • Press or peen the rivet head so that the di- ameter of rivet head measures to 8.2 mm (0.32 in) or larger @. 4-4 http://ReadManuals.com