I POTW R Rio IQ\I PRIMARY SHEAVE AND DRIVE V-BELT _ -~_ ------------------------------------------------- 6. Measure: • Bushing inside diameter Out of specification -+ Replace. I~ Bushing inside diameter Primary sheave cap Sliding sheave New 28.0 mm 41.0 mm (1.10in) (1.61 in) Wear limit 28.2 mm 41.2 mm (1.11 in) (1.62 in) • Bushing inside diameter Out of specification ----> Replace as a set. ~ 7. Measure: Bushing inside diameter Roller Weight New 8.0mm (0.31 in) f- Wear limit 8.2mm f- (0.32 in) ASSEMBLY Reverse the "DISASSEMBLY" procedure. Note the following points. 1 . Install: • Sliding sheave (onto spider) NOTE:
Be sure the sliding sheave match mark (x) is aligned with the spider match mark (x). 2. Install: • Fixed sheave (onto spider) NOTE: Apply LOCTITE® CD to the first 4 threads of the spider. LOCTITE® should be applied only to the area specified. Never apply to the bushings and other areas. • Fixed sheave stoppers G) NOTE: ________________________ _ 3. Install: Stoppertapered portion should face fixed sheave. 4-5 http://ReadManuals.com