SECONDARY SHEAVE Ip~':RIO 01 REMOVAL 1. Apply the brake to lock the secondary sheave. 2. Remove: • Bolt CD (secondary sheave) Washer® Shim(s)@ Collar@ • Secondary sheave ® DISASSEMBLY A WARNING • Use extreme CAUTION when disassembling the secondary sheave as serious injury can occu r from the sudden release of spring tension. Use the Sheave Compressor (90890-01712.YS- 28891) to contain the spring tension before removing the retaining clip. Do not attempt the procedure unless you have the proper tools and understand the instructions thoroughly. 1. Remove: • Circlip CD Washer® 2. Remove:
• Spring seat CD • Secondary sheave spring ® • Sliding sheave @ • Shim(s) @ (drive V-belt) (from fixed sheave) INSPECTION 1. Inspect: • Sliding sheave CD • Fixed sheave ® • Spring seat @ Cracks/Damage ~ Replace. 4·9 http://ReadManuals.com