Yamaha Exciter II-570 — Secondary Sheave

SECONDARY SHEAVE IP~'FYRlo ml 2. Inspect: • Bushing CD (sliding sheave) • Sliding sheave ® (V-belt contact surface) Scratches!Wear/Damage -- Replace. • Sliding bushing @ Unsymmetrical wear/Damage -- Replace. 3. Inspect: • Secondary sheave spring CD Cracks/Damage -- Replace. 4. Measure: w • Torsion spring free length ® Less than specification -- Replace. Free length limit: 85.0 mm (3.35 in) 5. Measure: • Ramp shoe thickness ® Out of specification--Replace. I ~ Wear limit: v AI 1.0 mm (0.04 in) ASSEMBLY Reverse the "DISASSEMBLY" procedure. Note the following points. ,. Lubricate: • Bushing surface (thin coat) Recommended grease: --.. ESSO beacon 325 grease or Aeroshell grease #7 A 2.lnstall:

• Secondary sheave spring CD NOTE: Hookthe end of the secondary sheave spring onto the spring hole in the sliding sheave. Standard spring position: Position "8"-"2" For EX570(E) "A"-"2" For EX570ST/SX 4-10 http://ReadManuals.com