Installation steps: Always use a new circlip. • Turn in the screwforthe sheave compressor so that the spring seat splines engage with the fixed sheave splines. NOTE: ______________________ _ Turn in this screw to a position where the spring seat cam CD does not come in contact with the sliding sheave cam ®. • Turn the sliding sheave the specified de- grees, in the counterclockwise direction. • Holding the sliding sheave and fixed sheave in this position. ® Standard twist angle: A-2 ---t 50· B-2 ---t 60· • Turn in the screw forthe sheave compressor so that the spring seat engages with the sliding sheave. • Install the washer and circlip in proper posi- tion.
INSTALLATION Reverse the "REMOVAL" procedure. Note the following points. 1. Lubricate: • Splines (fixed sheave) Recommended grease: ...... ESSO beacon 325 grease or Aero shell grease #7 A 2. Tighten: ~ Secondary sheave bolt: ~ 60 Nm (6.0 m • kg, 43 ft • Ib) 3.Adjust: • Sheave distance • Sheave offset • Free play (clearance) 4-11 http://ReadManuals.com