SECONDARY SHEAVE Ip~~RIO 01 4E021 SHEAVE DISTANCE AND OFFSET ADJUST- MENT 1. Measure: • Sheave distance ® Use the Sheave Gauge (-,YS-91047-A). Out of specification -;. Adjust. Sheave distance: 267 .. 270 mm (10.5 .. 10.6 in) 2. Adjust: • Sheave distance Adjustment steps: • Check the engine mounting bracket, damp- ers and frame for bends, cracks and corro- sion. Repair or replace as required. • Loosen the engine mounting nuts ill. Adjust the position of the engine with the adjuster®. Loosen the locknuts @ and turn the adjuster in or out until the specified distance is ob- tained, the crankshaft and jackshaft being parallel to each other. • Tighten the locknuts @.
• Tighten the engine mounting nuts ill. Mounting nut: 40 Nm (4.0 m • kg, 29 ft Ib) Locknut (adjuster): 36 Nm (3.6 m • kg, 26 ft • Ib) 4-12 http://ReadManuals.com