~~~~~~~~~~~S_E_OO_N_D_A_R_Y_S_HE_A_V_EIP~'o~1 3. Measure: • Sheave offset @ Use the Sheave Gauge (-, YS-39506-1). Out of specification -; Adjust. Sheave offset: 14.5 ~ 17.5 mm (0.57 ~ 0.69 in) 805-010 4. Adjust: • Sheave offset Adjustment steps: Apply the brake to lock the secondary sheave. • Remove the bolt (secondary sheave) and secondary sheave (D. Adjustthe sheave offset by adding or remov- ing shim(s)®. 805-013 Adding shim Offset is increased. Removing shim Offset is decreased. Shim size Part number Thickness 90201-252F1 0.5 mm (0.02 in) 90201-25527 1.0 mm (0.04 in) 90201-25526 2.0 mm (0.08 in) • Install the secondary sheave and bolt (secon- dary sheave). Bolt (secondary sheave):
)p~ 60 Nm (6.0 m • kg, 43 ft· Ib) • Recheck the sheave offset. If out of specifica- tion, repeat the above steps. NOTE: When adjusting the sheave offset, the secondary sheave free play (clearance) should be adjusted. 5. Measure: • Secondary sheave free play © (clearance) Use a feeler gauge. Out of specification -; Adjust. Secondary sheave free play (clearance): 0.5 ... 1.0 mm (0.02 ~ 0.04 in) 4-13 http://ReadManuals.com