REMOVAL 1. Remove: • Side cowlings Muffler • Secondary sheave (see page 4-9) • Drive sprocket (see page 4-16) • Bolts (brake caliper body) (see page 4-16) • Brake pads • Brake cable G) • Spring ® • Spring holder @ NOTE: ______________________ __ 2. Remove: Loosen the locknut G) and turn in the adjuster ® fully to release the tension in the brake cable, then remove the bolt (cable holder) @. 3. Remove: • Bolts (bearing housing) (see page 4-17) • Jackshaft (with bearing housing) • Brake disc Woodruff key DISASSEMBLY 1. Remove: • Back up plate G) • End cover® Do not disassemble the torsion spring from the end cover and the guide. 2. Remove:
• Adjusting ratchet G) • Bolts ® (stationary cover) 4-21 http://ReadManuals.com