I IANOSJP I ~·I BRAKE ADJUSTMENT/DRIVE CHAIN ~ --------------------------------------------------------- BRAKE ADJUSTMENT 1.Measure: • Brake lever free play @ Out of specification -+ Adjust. Brake lever free play: 0.3 ... 1.0 mm (0.012 ... 0.039 in) 2. Adjust: • Brake lever free play Adjustment steps: • Loosen the locknut CD . • Turn the adjuster®in or out until the specified distance is obtained. Turning in Free play is increased. • Tighten the locknut CD . Turning out Free play is decreased. DRIVE CHAIN Oil Level Inspection 1. Place the machine on a level surface. 2. Remove: • Side cowling (right) (See page 2-3) 3. Place a rag under the checking hole (oil level). 4. Remove:
• Checking bolt CD • Gasket (checking bolt) 5. Inspect: • Oil level (drive chain housing) Oil flows out -+ Oil level is correct. Oil does not flow out -+ Oil level is low. Add oil until oil flows out. Recommended oil: Gear oil API GL-3 SAE #75 or #80 • Gasket (checking bolt) Damage -+ Replace. 7. Tighten: 6. Inspect: Checking bolt: 10 Nm (1.0 m· kg, 7.2 ft· Ib) 2-18 http://ReadManuals.com