Yamaha Exciter II-570 — Disassembly

DISASSEMBLY I ENG I " 5EOO3 DISASSEMBLY OIL PUMP 1. Remove: • Oil pump CD Washer® Worm gear shaft @ Collar@ • Gasket@ WATER PUMP 1. Remove: • Coolant hose • Water pump cover • Impeller • Water pump housing • Starter pulley • Water pump drive belt • Impeller shaft assembly (see page 6-3) COl MAGNETO 1. Remove: • Engine bracket CD • Crankcase cover ® • Pickup coil @ 2. Remove: Nut CD (magneto rotor) • Washer NOTE: ______________________ __ Use the Universal Rotor Holder (90890-01235, YU- 01235) ® to hold the magneto rotor@. • Magneto rotor CD NOTE: ______________________ __ 3. Remove: • Remove the magneto rotor using the Rotor Puller (90890-01362, YU-33270) ® .

• Fully tighten the tool holding bolts, but make sure the tool body is parallel with the magneto rotor. If necessary, one screw may be backed out slightly to level tool body. 5-4 http://ReadManuals.com