I ENG I ~. ENGINE ASSEMBLY AND ADJUSTMENT ~ --------------------------------------------------------- NOTE: ______________________ ___ Pass the magneto leads through the hole, and install the grommet into the crankcase. ~ Screw (stator plate): ~ 7 Nm (0.7 m· kg, 5.1 ft· Ib) 2. Install: • Magneto rotor • Washer Nut (magneto rotor) Be sure to remove any oil and/or grease from the tapered portion of the magneto rotor using a dampened cloth with thinner. NOTE: ______________________ ___ When installing the magneto rotor, make sure the woodruff key is properly seated in the keyway of the crankshaft. 3. Tighten: Magneto rotor nut CD: 85 Nm (8.5 m • kg, 61 ft Ib) NOTE:
______________________ __ Use the Universal Rotor Holder (90890-01235, YU- 01235) ® to hold the magneto rotor@. 4. Install: • Pickup coil CD • Crankcase cover ® • Engine bracket @ Bolt (crankcase cover): 23 Nm (2.3 m • kg, 17 ft Ib) 5-20 http://ReadManuals.com