Yamaha Exciter II-570 — Recoil Starter

RECOIL STARTER I ENG I " I 3. Untie the knot on the handle end of the starter rope. Allow the rope to be pulled into the starter case. This will release spring tension behind the sheave drum. 4. Remove: • Sheave drum CD A WARNING There is a starter spring under the sheave drum. Remove the drum carefully. Otherwise the spring could spring out and could possibly cause injury. 5. Remove: • Starter spring CD Inspection 1. Inspect: • Drive plate CD Cracks/Bends/Damage ~ Replace. • Spring ® (drive plate) Wear/Damage ~ Replace. • Starter rope @ Wear/Breaks/Damage ~ Replace. • Starter spring @ Cracks/Bends/Damage ~ Replace. • Sheave drum ® Cracks/Damage ~ Replace.

• Drive pawl ® • Return spring (j) Wear/Cracks/Damage ~ Replace. Assembly and installation 1. Hook the starter spring around the post in the starter case. Carefully wind the spring counterclockwise, and fit the spring into the case. NOTE: ______________________ _ After installing the spring thoroughly apply the low-temperature grease. 5-24 http://ReadManuals.com