Yamaha Exciter II-570 — Recoil Starter

RECOIL STARTER I ENG I \> I 2. Passthe starter rope end intothesheavedrum, and knotthe rope end. Then fitthe knot into the cutout in the sheave drum. 3.Wind: • Starter rope (2 turns counterclockwise) (to sheave drum) 4. Install: • Sheave drum (into starter case) NOTE: Be sure the inner hook on the starter spring hooks around the post on the sheave drum. 5.Apply: • Grease (lightly) (to pivot point of the drive pawl) 1..1- __ .. I_L_O_W_"_te_m_p_e_ra_t_u_re_ 9 _r_e_a_s_e ____ --II ~ 6. Install: • Drive pawl CD • Return spring ® NOTE: Hook the return spring end to the drive pawl CD. Then, hook other end of the return spring to the post @ on the sheave drum. 7. Install:

• Spring (drive plate) • Spring seat • Drive plate • Special washer • Washer • Spring washer Nut 5-25 http://ReadManuals.com