SLIDE RUNNER INSPECTION a. Startthe engine and rotate the track one or two turns. Stop the engine. b. Check the track alignment with the slide runner ®. If the alignment is incorrect, turn the left and right adjusters to adjust. Track alignment ® Shifted (j) Shifted 820-008 to right to left ® Left adjuster Turn out Turn in @ Right adjuster Turn in Turn out ® Slide runner @Track ® Track metal @ Gap @ Forward c. Adjust track deflection to the specified amount. Track deflection More than Less than 820-005 Specified Specified ® Left adjuster Turn in Turn out @ Right adjuster Turn in Turn out ® (j) @+ The adjusters should be turned an equal amount . • Recheck alignment and deflection.
If neces- sary, repeat steps a to c until proper adjust- ment is achieved . • Tighten the rear axle nut. 820-009 Rear axle nut: 75 Nm (7.5 m-kg, 54 ft-lb) SLIDE RUNNER INSPECTION 1. Inspect: • Slide runner CD Cracks/DamageMlear~Replace. 2-22 http://ReadManuals.com