_____________ ~_R_B_U_~_T_O_RlcA~I~1 6. Tighten: • Screws CD (inner throttle lever) Screw (inner throttle lever): 2 Nm (0.2 m • kg, 1.4 ft· Ib) FUEL LEVEL ADJUSTMENT 1. Measure: • Fuel level Out of specification ---+ Adju!?t. Fuel level: 3.5 - 5.5 mm (0.138 - 0.216 in) Measurement and adjustment steps: • Place the machine on a level place. • Attach the Fuel Level Gauge (90890-01312, YM-01312-A) CD to the float chamber nozzle. NOTE: ___________ _ Use the adapter (outside diameter flJ6 hose) ® when attaching the Fuel Level Gauge. • Loosen the drain screw @ and start the engine. • Place the tube along the seam line @ of the carburetor body. • Measure the fuel level @ with gauge.
If the fuel level is incorrect, adjust the fuel level. • Remove the carburetor. • Inspect the valve seat and needle valve. If either is worn, replace them both. • If both are fine, adjust the float height by bending the float tang ® on the float. • Recheck the fuel level. 7-8 http://ReadManuals.com