4. Inspect: • Fuel hose G) • Fuel delivery hoses ® • Pulser hose @ Clog/Damage ~ Replace. 5. Check: • Fuel pump operation Checking steps: • Connect a hand-operated vacuum pump G) (Such as Mighty - Vac®) to the pulser hose ®. • Place a receptacle @ under the fuel delivery hoses end @. • Opetate the hand-operated vacuum pump G) (Such as Mighty - Vac®), when checking the fuel flow from the fuel delivery hoses @. If fuel does not flow out, check the fuel cock. If no defects are observed on the fuel cock, replace the fuel pump assembly. • To replace the fuel pump assembly, perform the following steps from 6 to 7. 6. Disconnect:
• Pulser hose G) (from the crankcase) • Fuel hose ® (from the fuel tank) • Fuel delivery hoses @ (to the carburetor) A WARNING Plug the fuel hose® sothatfuel does not run out of the fuel tank. Spilled fuel can be a fire hazard. 7. Replace: • Fuel pump assembly@ Nut (fuel pump assembly): 10 Nm (1.0 m· kg, 7.2 ft· Ib) 7-16 http://ReadManuals.com