Yamaha Exciter II-570 — Fuel Pump

CARBURETOR/FUEL PUMP I CARB I iii I Measurement and adjustment steps: • Place the machine on a level place. • Attach the Fuel Level Gauge (90890-01312, YM-01312-A) ill to the float chamber nozzle. NOTE: ___________ _ Use the adapter (outside diameter 1216 hose) ® when attaching the Fuel Level Gauge. • Loosen the drain screw ® and start the engine. 't::::~=i::;;Jj-~~-'---''------'-------t ® Place the tube between the guide marks@ on the carburetor body. • Measure the fuel level ® with gauge. If the fuel level is incorrect, adjust the fuel level. • Remove the carburetor. • Inspect the valve seat and needle valve. If either is worn, replace them both.

If both are fine, adjust the float height by bending the float tang ® on the float. • Recheck the fuel level. FUEL PUMP OPERATION CHECK 1. Remove: • Drive V-belt guard (see page 2-17) • Drive V-belt • Secondary sheave (see page 4-9) • Carburetors (see page 7-2, 7-10) • Spark plug leads ill • Ignition coil leads ® 3. Remove: 2. Disconnect: • Intake silencer ® 7-15 http://ReadManuals.com