Yamaha Exciter II-570 — Electrical

HEADLIGHT AND METER LIGHT BULB REPLACEMENT I rgf I ~ I 5. Disconnect: • Headlight coupler CD 6. Remove: • Cover ® (bulb holder) • Bulb holder ® NOTE:------------------------ While pushing the bulb holder ®, turn it counter- clockwise. 7. Remove: • Bulb (defective) CD AWARNING Keep flammable products (and your hands) away from the bulb while it is on; it will be hot. Do not touch the bulb until it cools down. • Bulb (new) CD NOTE: ______________________ ___ 8. Install: Make sure the projections ® on the bulb are meshed with the slots ® on the light case. Avoid touching the glass part of the bulb. Keep it free from oil; otherwise. the transparency of the glass.

life of the bulb and iIIuminous flux will be adversely affected. If oil gets on the bulb. thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. • Bulb holder CD NOTE: ______________________ _ 9. Install: • Install the bulb holder so that the "TOP" mark ® faces upward . • While pushing the bulb holder CD ,turn it clockwise. 2-26 http://ReadManuals.com