----------------------------------------~~~~~------- I IANoSJP 1 *-'·1 FUSE INSPECTION ~ When inspecting the battery, be sure the breather hose is routed correctly. If the breather hose touches the frame or exits in such a way as to cause battery electrolyte or gas to exit onto the frame, structural and cosmetic damage to the snowmobile can occur. 7. Install: • Protector plate (battery) FUSE INSPECTION (for EX570ER) 1. Remove: Fuse CD ® Spare fuse 2. Inspect: Fuse Defective~Replace. Blown fuse (new)~lnspect circuit. NOTE: ______________________ ___ Install new fuses of proper amperage. Description Amperage Quantity Main 10A 1 Spare 10A 1 Replacement steps:
• Turn off the ignition and the circuit. • Install a new fuse of proper amperage. • Turn on the switches to verify operation of electrical device. Iffuse blows again immediately, check circuit in question. AWARNING Do not use fuses of higher amperage rating than recommended. Extensive electrical system damage and fire could result from substitution of a fuse of improper amperage. 2-30 http://ReadManuals.com