GEARING SELECTION I r8f I tll GEARING SELECTION The reduction ratio of driven gear to drive gear must be set according to the snow condition. If there are many rough surfaces or unfavorable snow conditions, the drive/driven gear ratio should be made larger. If there are few rough surfaces or better snow condition; the ratio should be made smaller. Gear Ratio Chart The following drive and driven gears and chains are available as options. The figures in upper lines represent the driven and drive gear ratios, while those in lower lines represent the number of chain links. NOTE: ______________________ ___ Do not set the gearing to any of the indicated (x) settings.
~ 16 17 Driven gear 18 20 21 22 29 1.81 64 X X 1.45 X 1.32 66 68 33 X 1.94 68 *1.83 1.65 X 1.50 68 68 70 35 2.19 2.06 68 68 X 1.75 1.67 X 70 70 Drive gear options Chain options Yamaha Parts No. Rexnord Parts No. No. of links Yamaha Parts No. Rexnord Parts No. Sprocket Teeth *88F-17682-60 None 16T S37TNBll CHAIN 94860-01064 2'.0"LG (64P) 64 88F-17682-70 EY-19647 17T S37TNBll CHAIN 94860-01066 2'.0"-3/4"LG (66P) 66 *88F-17682-80 EY-19347 18T 88F-17 693-10 EY-19399 21 T 88F-17 693-00 EY-20333 20T S37TNBll CHAIN *94860-01068 2'.1"-1/2"LG (68P) 68 88F-17693-20 EY-19440 22T S37TNBll CHAIN 94860-01070 2'.2"-1/4"LG (70P) 70 * Yamaha machine only use Driven gear options *Standard Yamaha Parts No.
Rexnord Parts No. Sprocket Teeth 88F-47548-90 EY-18988 29T *88F-47 587 -00 EY-18989 33T 88F-47587-20 EY-18294 35T 2-42 http://ReadManuals.com